Soft Top Clips

Soft Top Clip Installation Instructions:

1.) Remove the retaining screws and remove old clip.

2.) Select a replacement clip. Because of the new design these aluminum clips can be used for both the Window clips and Tailgate clips.

3.) Tighten the screws carefully until you feel the resistance increase as the screw bottoms out. Tighten an additional 1/16th of a turn. The torque is very low, do not over tighten.

Note: Use of a bikini top with straps that tighten against the window bar may cause damage to the window clips. We recommend billet clips on the side windows if you intend to use a bikini top. Likewise, tops that are too tight or misalignment of the bars with the clip (especially the side windows) may cause clip breakage. Care is advised when first aligning the window bars with the clips!